21PC Ball Joint Press Service Tool Kit

/

Material: carbon steel

Coating: painting and black oxiding

Moulding Tech: drop forged

1x “C” Frame Press ; 1x “C” Frame Screw ; 3x Receiving Tubes 2-1/4″ X 3″, 1-3/4″ X 2-1/2″, 1-3/4″ X 2″ ; 1x Install Adaptor ; 1x Remover Adaptor ; 1x Center Plug O.D. 7/8″ ; 1x Receiving Tube O.D. 2-1/2″, I. D. 2-1/4″ Length 3/4″ ; 1x Receiving Cap Adaptor O.D. 2-1/4″, I. D. 2″ Length 2″ ; 1x Remover Installer O.D. 1-7/16″, I. 3/4″ Length 1″; 1x Receiving Cup O.D. 2-1/2″, I. D. 1-1/4″ Length 1-1/2″; 1x Receiving Tube O.D. 2-3/4″, I. D. 1-7/16″ Length 2-1/4″; 1x Receiving Tube O.D. 3″, I. D. 2-3/4″ Length 2-1/4″; 1x Receiving Cup O.D. 2-1/4″, I. D. 2″ Length 2″; 1x Receiving Tube O.D. 2-1/2″, I. D. 2-1/4″ Length 2-3/4″; 1x Installing Cup O.D. 2″, I. D. 1-3/4″ Length 2-5/16″; 1x Receiving Cup O.D. 2-7/8″, I. D. 2-5/8″ Length 3-7/8″; 1x Receiving Cup O.D. 2-7/16″, I. D. 2-3/16″ Length 3-3/16″; 1x Install Cup O.D. 2″, I. D. 1-3/4″ Length 3″

9PC (4IN1 ) 2Wd/4Wd Ball Joint Press Service Tool Kit

/

Material: carbon steel

Coating: zinc and black oxiding

Moulding Tech: drop forged

1x Installing Cup 3.676″ L x 1-3/4″ I.D. x 2″ O.D. ; 1x Receiving Cup 2-1/2″ L x 2″ I.D. x 2-1/4″ O.D. ; 1x Install Cup Adapter 0.845″ L x 1.879″ I.D. x 2-1/4″ O.D. ; 1x Removal Adapter 1.148″ L x 1/2″ I.D. x 3″ O.D. ; 1x Installation Adapter 1.122″ L x 0.941″ I.D. x 3″ O.D. ; 1x Receiving Tube 2-1/4″ L x 2.723″ I.D. x 3″ O.D. ; 1x Receiving Tube 1-3/4″ L x 2-1/4″ I.D. x 2-1/2″ O.D. ; 1x Receiving Tube 1-3/4″ L x 1-3/4″ I.D. x 2″ O.D. ; 1x Screw 1.08” ; Ball Joint Press 8.75” inner 6 ;

5PC Fork Type Tie Rod Ball Joint Seperator Kit

/

Material: carbon steel

Coating: zinc plated

Moulding Tech: drop forged

heat treatment, HRC35-42 for forks; no HRC for bolt

1x tie rod spreader with 11/16” (17.5mm) wedge opening ;

1x ball joint separator with 15/16” (23.8mm) jaw opening ;

1x pitman arm wedge with 1-1/8” (28.6mm) opening ;

1x 7-3/4″ (196.9mm) Kunrled striking handle for use with conventional hammers ;1x 6-3/4″ (171.5mm) adapter handle for use with air hammer ;

5PC Tie Rod Ball Joint Puller Kit

/

Material: carbon steel

Coating: chrome plated

Moulding Tech: drop forged

Package: blow mold case

Large C-shape puller jaw spread 34mm & throat depth ;

Small C-shape puller jaw spread 28.5mm & throat depth ;

Swing Arm Tie rod puller jaw spread 0-64mm & throat depth 105mm ;

Small L-shape puller jaw spread 20mm & throat depth 20mm ;

Large rocker arm puller jaw spread 21mm & throat depth ;

Scroll to Top